Payment & Shipping Terms:
|Pressure System:||2 Sets||Material:||Aluminum|
|Liquid Capacity:||MAX: 40 L, MIN: 20 L||Dimention:||650(L)x1000(W)x1630(H)mm|
|Max. Stencil Size:||736mm*736mm*40mm||Clean Time:||4-6min|
stencil cleaning machine
Unicomp EMS Electronics Industry Equipment Automatic Pneumatic Cleaner
Patent design, close contacting ultrasonic combining with spray cleaning, the stencil is no need to dip into the tank;
The stencil moves up and down with a gap 0.5-2 mm between the ultrasonic source with the cleaning agent fl ows by;
High pressure air knives blowing the stencil closely during the lift makes the drying time very short;
Efficiently clean fi ne printing pitch and apertures with the solder paste and glue;
The cycle time is less than 10 min for the solder paste and 15 min for the glue;
PLC control, two modes, simple operation with buttons, safe and reliable, easy maintenance;
MPC technology with fi ltration system, low running cost and environment-friendly.
One year. Free replacement of part if it is due to original manufacturer's defect.
We will check and test the machine before shipping out.
We provide you the friendly English User manual or the operating videos for free;
24 hours technical support by email or teamviewer
MOQ: One set.
|Application||Solder paste, glue, deposit||Solder paste|
|Pressure System||2 Sets||1 Sets|
|Liquid Capacity||MAX:40L, MIN:20L|
|Four Levels Filtering System||20μm, 10μm, 5μm, 1μm|
|Air Consumption||400-600L/minute(In Dry Condition)|
|Solvent||IPA, alcohol and water-based solvent|
Contact Person: Unicomp-sales